Screened Enclosures | Customer Installations
|
|
Hard
Roof Screen Room Materials
Three Season Patio Room
Kits
|

Proudly made in U.S. of A. |
Deck / Patio Mounted
Screened Enclosure Systems
Current Delivery Zones
This
is the ultimate in the type of three season screened enclosures you
can put on your deck or patio. Fully engineered load bearing roof panels allow
for a permanent installation and the extruded aluminum framing makes
this installation virtually maintenance free. Insulated polystyrene
core roof panels are chosen according to your required local load
requirements. Extruded aluminum framing assures maximum strength and
reliability and a large selection of screening makes sure you have
designed your room according to your needs. High quality, durable and maintenance free - -
all at a price that will not break the bank and it comes with all
the help you need from Home Porch & Patio Kits Inc.
DESIGN
- Snap-lock Locking
System
- Industry-standard
Finish Colors
- Stucco Embossed texture
|
STRENGTH
- Limited Lifetime
Warranty
- Moisture & Mildew
Resistant
- Factory-bonded Aluminum
Skins
|
PROTECTION
- 1.5 pound EPS Foam
Core
- Superior Insulation
Properties
- Meets
Current Load Specifications
|
|
Links
& Complete Information
on our Screened Enclosure Systems |

|
Strength
Quality
Customization
DIY Installation |

*Click* |
|
*Click
Here to Check Out 2022
Sample Pricing & Layouts*
-Almost any size is
possible-
We cannot give pricing over the phone, BUT...
*Click
Here to Know What We Need to
Quote Your Project*
 |
 |
Jack Harper had a friend help
with his installation. With is
early spring installation, he
was able to enjoy the full
summer & fall seasons in
comfort! |
 |
 |
 |
Mr. Fleming loves his new screen
room! "Hey Glenn, I thought I
would share a couple pictures of
the completed project. Thanks
for all your help and support." |

J. Allan
in SC used our flat pan roofing system and
incorporated our screen wall system to
create the perfect indoor space... outdoors! |

There is
nothing like having a screened enclosure
installed next to the pool!
This poolside
installation illustrates what you can do
with the horizontal mainframe. This customer has
installed the 2 x 2 horizontal chair rail at
the 18" mark to match that on the door and
up top to match the header placement above
the door. This gives a clear line of sight
while sitting in the screen room and a
uniform look on all three sides!

RV & Trailer
installations are extremely popular!
This installation
illustrates leaving a portion of the deck
open for sitting in the sun and for BBQ'ing. This customer has
installed the 18" kickplate to match the
kickplate that comes with the standard knock
down screen door! |
|

Turn that
backyard deck into something special!
|
 |
|
 |

Literally
double the size of your vacation home living
space! |

Jackie W.
shares with us how a little creative
lighting makes
for the perfect nighttime getaway! |
You will need to know
your local (city / municipal building
department) live load requirements (lb./sq.ft.)
and wind speed requirements (mph.)
Your city building department is
where building permits are issued from. You may or may
not need an actual permit for your installation. This responsibility
rests with the
homeowner. It is our strong recommendation that you
acquire your permit prior to purchase. We
can help with that! However, panel thickness, beam placements,
beam size, distance between posts out front... all are a
function of the load (snow
& wind) that your cover will be subject to.
Though you may not require a
permit, we ask that you acquire the load requirements
for your area, so that we can supply
you with the 'correct' thickness and configuration of materials! |
|
Links
& Complete Information
on our Screened Enclosure Systems |

|
Strength
Quality
Customization
DIY Installation |

*Click* |
|
This table describes how far a panel
can span away
from the wall out to the beam & posts assembly
How to read the table: For example... a 3" thick roof
panel will span 12'7" away from the wall under a 20 lb. loading
Maximum Panel Simple Span Load Table
| Rated for 115 mph (or less) wind loading |
Roof Thickness |
10
psf |
20
psf |
25
psf |
30
psf |
35
psf |
40
psf |
50
psf |
3" Thick | .024" Skin |
16' |
12'7" |
11'7" |
10'10" |
10'1" |
9'6" |
8'7" |
4" Thick | .024" Skin |
19' |
15'1" |
13'8" |
12'7" |
11'8" |
10'11" |
9'9" |
6" Thick | .024" Skin |
22' |
18'3" |
16'5" |
15' |
14' |
13'1" |
11'9" |
|
The
manufacturer reserves the right to send
longer / wider than ordered material,
requiring the DIY customer to make the
final cuts on site in order to achieve
the desired finished size. |
Use the links
given above for more information on this
product.
Doing it yourself does not mean doing
it alone!
1.844.404.0484
|