Modular Insulated
Walls & Windows
|

Proudly made in U.S. of A. |
Insulated Glass Porch
Enclosure Materials
 Modular Insulated Wall
ONLY Kits
We ship this product
nationwide throughout the
contiguous USA*
**
Click here for current
Delivery Zones
Each of the sample layouts listed are fully described and
priced for your convenience... We
have put together a couple of them, where each
unit is fully described, priced and drawn out for your
inspection. These can also help you assess your own situation and
even give you an idea of the cost for a similar size. Remember these
are sample layouts! Be sure to investigate the product thoroughly
before going to 'Step 1' on our estimate page and as always
you will get all
the help you need from Home Porch & Patio Kits Inc. |
**
Click here for current
Delivery Zones
Sample #1
| OMEGA Modular
"Walls Under" System
 |
Insulated Modular Sunroom Walls
- 7' 5" (single wall) | 7' 5-1/2" (single wall) | 11' 2"
(single wall) | 7' 7" (single wall) | 11' 2-1/4" (single
wall) -- 7' 1-1/2" approx. wall heights as indicated in
drawing.
Installation Guidelines:
http://www.homeporchandpatiokits.com/pdfs/Insulated_Walls_Installation_Guidelines.pdf
'Dual thermal' vinyl clad 4" thick walls
(White Framing) | Extruded aluminum structural framing
with TuffCore vinyl coated polystyrene core insulated
filler sections | Almond pebble finish inside & Almond
pebble finish outside. The insulated core sections are
in place so as to be trimmed on site, by the customer,
to accommodate exact sizes for each section, slopes and
non-square corners. Includes (1) electrical utility
mullion
Vinyl windows
Vinyl windows constructed with 3 ¼” thick framing, dual
cam locks & our EZ Glide Quad Roller system.
-
(10) 42"
wide x 54" high standard dual sliding windows |
1” Sealed Double Pane
Low E Glass (Smart 60)
-
(2) 24" wide
x 54" high custom dual sliding windows |
1” Sealed Double Pane Low E
Glass (Smart 60)
-
All
sliding windows come with fixed exterior screens
Front Elevation Transoms &
Kickplates
-
Solid EPS core fill above
all windows
-
24" tall kickplate below
all windows | 1” Sealed Double Pane Low E
Glass
-
Solid 2" EPS core fill
below all kickplates
|
Left Elevation Transoms &
Kickplates
-
Solid EPS core fill above
all windows and doors
-
24" tall kickplate below
all windows | 1” Sealed Double Pane Low E
Glass
-
Solid 2" EPS core fill
below all kickplates
|
Right Elevation Transoms &
Kickplates
-
Solid EPS core fill above
all windows
-
24" tall kickplate below
all windows | 1” Sealed Double Pane Low E
Glass
-
Solid 2" EPS core fill
below all kickplates
|
Doors
Standard Pedestrian Swing
doors are 1-3/4” thick and come standard with
nickel plated hardware and continuous Q-lon
weather stripping around door jamb and threshold
|
All window frames:
Almond | All door frames: Almond
| All TuffCore panels: Pebble finish (exterior) panels:
Almond
All TuffCore panels:
Pebble finish (interior) panels: Almond |
All Aluminum extrusions: Almond
Estimated Delivery time is
in the 6-8 week range. |
 |
*As a DIY
application the customer should expect to be making
final cuts for roof panel sizes, module heights, channel
lengths, EPS Core fill sections, side fascia, backwall C
channel and front gutter lengths on site. Connection
hardware to existing surfaces (house wall, fascia board,
deck, patio) supplied by customer.
OMEGA "Walls ONLY" System
This page is
being updated to reflect current pricing and delivery
restrictions.
Thank
you for your patience.
If you want
a quick
estimate for
your size of
DIY modular
sunroom,
delivered to
your
location,
familiarize
yourself
with our
product, and
then go to
the link
below.
|
|

Sample #2
| OMEGA Modular
"Walls Under" System

|
Insulated Modular Sunroom Walls
- 12' 3.25" (single wall) | 7' 10.625" (single wall) |
7' 10.25" (single wall) | 8' 1.75" (single wall) | 7'
7.375" (single wall) | 7'9" (single wall) -- 9' 5.125"
wall heights as indicated in drawing
'Dual
thermal' vinyl clad 4" thick walls (Almond Framing) |
Extruded aluminum structural framing with TuffCore vinyl
coated polystyrene core insulated filler sections |
Almond Stucco finish inside & Almond Stucco finish
outside. The insulated core sections are in place so as
to be trimmed on site, by the customer, to accommodate
exact sizes for each section, slopes and non-square
corners.
Vinyl windows
Vinyl
windows constructed with 3 ¼” thick framing, dual cam
locks & our EZ Glide Quad Roller system.
-
(1) 54" wide
x 54" high standard dual sliding windows |
1” Sealed Double Pane Low E
Glass (Smart 60)
-
(6) 36" wide
x 54" high standard fixed windows |
1” Sealed Double Pane
Low E Glass (Smart 60)
-
All
sliding windows come with fixed exterior screens
Left Elevation Transoms &
Kickplates
-
Solid EPS core fill above
all transoms
-
Includes 1” Sealed Double
Pane Low E Glass (Smart 60) 24"
transom premade
and installed above each of the windows &
doors
-
Includes 1” Sealed Double
Pane Low E Glass (Smart 60) 24"
kickplate premade and installed below each
of the windows
-
Solid 2" EPS core below
all kickplates
|
Front Elevation Transoms &
Kickplates
-
Solid EPS core fill above
all transoms
-
Includes 1” Sealed Double
Pane Low E Glass (Smart 60) 24"
transom premade
and installed above each of the windows
-
Includes 1” Sealed Double
Pane Low E Glass (Smart 60) 24"
kickplate premade and installed below each
of the windows
-
Solid 2" EPS core below
all kickplates
|
Right Elevation Transoms &
Kickplates
|
Doors
Easy-to-operate sliding patio
doors with welded vinyl, continuous weather
stripping & warm edge elastomeric separators
|
All window & door frames:
Almond | All TuffCore panels: Stucco
finish (exterior) panels: Almond
All TuffCore panels:
Stucco finish (interior) panels: Almond |
All Aluminum extrusions: Almond
Estimated Delivery time is
in the 6-8 week range. |
 |
*As a DIY
application the customer should expect to be making
final cuts for roof panel sizes, module heights, channel
lengths, EPS Core fill sections, side fascia, backwall C
channel and front gutter lengths on site. Connection
hardware to existing surfaces (house wall, fascia board,
deck, patio) supplied by customer.
OMEGA "Walls ONLY" System
This page is
being updated to reflect current pricing and delivery
restrictions.
Thank
you for your patience.
If you want
a quick
estimate for
your size of
DIY modular
sunroom,
delivered to
your
location,
familiarize
yourself
with our
product, and
then go to
the link
below.
|
|

Sample #3
| Alpha Plus Modular
Sunroom System
 |
Insulated Modular
Sunroom Walls - 10' (single wall) | 10' (single
wall) | 10'10" (single wall) | 10'4" (single wall) |
10'10" (single wall) -- 10' wall heights as indicated in
drawing.
3.5" thick TuffCore clad EPS core walls (White) | White
extruded aluminum structural framing with TuffCore vinyl
coated polystyrene core insulated filler sections. The
insulated core sections are in place so as to be trimmed
on site, by the customer, to accommodate exact sizes for
each section, slopes and non-square corners.
Installation includes 4 electrical utility mullions.
Installation Guidelines:
http://www.homeporchandpatiokits.com/pdfs/Insulated_Walls_Installation_Guidelines.pdf
Vinyl windows
Vinyl
windows constructed with 3 ¼” thick framing, dual cam
locks & our EZ Glide Quad Roller system.
-
(12) 36"
wide x 54" high standard dual sliding windows |
1” Sealed Double Pane
Low E Glass (Smart 60)
-
(2)
18" wide x 54" high
standard fixed windows | 1” Sealed Double
Pane Low E Glass (Smart 60)
-
All
sliding windows come with fixed exterior screens
Left Elevation Transoms &
Kickplates
-
Solid EPS core fill above
all transoms
-
Includes 1” Sealed Double
Pane Low E Glass 24" transoms premade
and installed above each of the windows.
-
Solid EPS core fill below
all windows
|
Front Elevation Transoms &
Kickplates
-
Solid EPS core fill above
all transoms
-
Includes 1” Sealed Double
Pane Low E Glass 24" transoms premade
and installed above each of the windows and
doors.
-
Solid EPS core fill below
all windows
|
Right Elevation Transoms &
Kickplates
-
Solid EPS core fill above
all transoms
-
Includes 1” Sealed Double
Pane Low E Glass 24" transoms premade
and installed above each of the windows.
-
Solid EPS core fill below
all windows
|
Doors
Standard Pedestrian Swing
doors are 1-3/4” thick and come standard with
nickel plated hardware and continuous Q-lon
weather stripping around door jamb and threshold
|
All window & door frames:
White | Roof Extrusions: White
| All TuffCore panels: Pebble finish
(exterior) panels: White
All TuffCore panels:
Pebble finish (interior) panels: White |
All Aluminum extrusions: White
Estimated Delivery time is
in the 6-8 week range. |
 |
*As a DIY
application the customer should expect to be making
final cuts for roof panel sizes, module heights, channel
lengths, EPS Core fill sections, side fascia, backwall C
channel and front gutter lengths on site. Connection
hardware to existing surfaces (house wall, fascia board,
deck, patio) supplied by customer.
Alpha Plus "Walls ONLY"
System
This page is
being updated to reflect current pricing and delivery
restrictions.
Thank
you for your patience.
If you want
a quick
estimate for
your size of
DIY modular
sunroom,
delivered to
your
location,
familiarize
yourself
with our
product, and
then go to
the link
below.
|
|
**
Click here for current
Delivery Zones
Approvals & Specifications
- I.C.C. Approval
(International Conf. of Building Officials)
- IRC (International
Residential Codes)
- IBC (International
Building Codes)
- CBC (California
Building Code)
- Meets or Exceeds
National Glass Code
- Factory Built
Housing Approval
- C.M.B.S.O.A.
Approval (Security Windows)
- A-Rated Dual Glass
(ALI Laboratories)
- U.L. Classified
Patented Electrical Raceways
- AAMA Approved
Windows and Doors
 |
Modular
Construction for Easy Installation
• Standard dual sliding window
widths of 36”, 42”, 48” and 54”
• Modules are cut and assembled in a quality controlled
environment
• Unit only requires final placement cuts at the jobsite
• Less cuts in the field requires less fillers
• Every piece is quality checked before leaving the
factory
• Less exposed fasteners and caulking
• Assembled in a fraction of the time of a KD assembly
• Installation guidelines and support available
•
Modular construction make installation a snap.
• Most
room sizes can be installed in just a couple days.
• 100% Made in the
U.S.A.
•
List of tools you
may need
|

Unequalled by any other
sunroom maker...
warranted for life, as long as you own it!
|
Use the links
given above for more information on this
product.
Doing it yourself does not mean doing
it alone!
1.844.404.0484
|