|
|
|
From Innovation to Transformation...
Doing it
yourself does not mean doing it
alone!
Do-It-Yourself Materials & Kits Designed for the
Average Homeowner!
Aluminum
Patio Covers,
Screening Systems, Modular Walls Only, Modular Sunrooms,
Screened
Enclosures, Retractable Screens, Window Awnings
|
|
|
Screen
Walls Only Installations
|
|
Customer Porch Enclosure
System
 |
Click on
the links below for
Complete Porch Screening Material
Information |
This 'do it yourself' kit is classified as a
"materials supplied"
kit.
|
Screen In
Existing Covered Porches and Patio Covers
We will be pleased to
email you a
'no obligation' /
'delivery included'
quotation you can count on.
Click Here
First...
 Current
Delivery Zones
 |
|
 |
Hi Glenn,
Here are some pictures of the finished
porch! I am going to "hang" sliding screen
doors, as the magnetics don't stay latched
in the wind. -Steve |
|
 |
 |
 |
 |
Mr. G
installed his clay frame system with a
simple chair rail. He had his own door on
hand and wanted to use it for the existing
doggy door! He made his new backyard
paradise complete with two hammocks and a
heater for the cool fall evenings. |
 |
 |
This customer
sent us pictures with only the
screening left to do. He chose an
18" kick-plate to match the 18"
kick-plate that comes standard with
the 36" knock down screen doors.
He also
wanted to let us see his handy work
as he used his DIY prowess to shape
the screen wall framing to go up
against his existing step-work.
|
 |
 |
 |
|
The customer
above installed our screen walls
inside their existing railings. With
no kickplate (except in the doors)
we supply the aluminum chair
rail-rail. This was installed at the
same height as the top of the
existing railing. Double wide screen
doors were part of the install. |
|
The customer
above screened in the lower portion
of the backyard veranda. They
installed a set of our double screen
doors, complete with 18" kick-plate. The customer opted for no kick-plate throughout the
remainder of the installation
and installed the chair-rail at the level of the top of
the door to
keep clear lower
sightlines. |
 |
 |
Bob N. loved
being able to tell the local
contractor who wanted $6400.00 USD
to do this project, that he did it
himself for less than one third the
cost!
We hear this so
often.
Bob also wanted
us to see his handy work on the end
panel as he transitioned the
material from a wider bottom section
to the narrower top section. A
little planning and then following
the rule or measure twice, cut once
and voila! This speaks to the
flexibility of the materials we
provide. |
|
|
D.M. is installing
a white frame screen walls kit with a
24" kickplate.
All that is left in this installation is
to put the
header above the door
and screen in the openings. |
|
|
A simple installation on three sides in
white extrusion. Customer chose
the chair rail height based on the height of
the furniture
in the room. Customer supplied
their own door. |
|
J.H. said it all in
a few words...
Thanks for all your help, great DIY
product!
(He supplied his own door.) |
Dear Glenn and Tom,
Now that the patio screening is finished, I
neatened the area and took photos. These
attached photos are reduced to 40 percent of
the original dimensions for easier
transmission by email. You may request the
original versions. Notice that for one scene
shot from the interior I had the door
opened. That shows the amount of darkening
of the view (only 10 percent?) compared to
no screen. We are pleased with all features
of this installation. You may use these
photos for your business documents and
demonstrations of your work.
- -
Ed H. |
|
 |
 |
|
K.M. had a small
three-sided application with our screen door
centered on one of the sides. He used out
clay framing which came close to one of his
existing trim colors on the house. His
installation also included the 18"
kickplate. Side wall screen sections were
divided into 3 x 45" sections. |
|
|
A.R. did a great job, using our materials
exactly for what they are intended. White
framing between existing support columns
with an 18" kickplate and our 36" in-swing
screen door. It looks fantastic! |
|
|
|
This customer took an
existing insulated roof with bronze beam and
posts and put a bronze screen walls system
between posts. The installation included the
18" kickplate option with a 36" screen door. |
|
 |
 |
 |
|
These customers
used our materials to screen inside
their existing railings.
It makes for an nice, neat and safe
installation. |
This customer
screened in a portion of their
existing patio cover. Perfect to
walk out of the house into the
screen room! |
|
We Are Here For You!
We've been doing
"Do-It-Yourself" for 20+
years!
We have access to
all the engineering on all
our components so we can
help make sure that what you
build will last a lifetime!
Our people are not
commissioned, so there are
no sales pressures and no
need to 'upsell' you on
something you actually don't
need.
We are simply here to
help and get you the DIY
materials you need to
accomplish your goals!
|
Doing it yourself does not mean doing
it alone!
Toll Free: 1.844.404.0484
|
|
|
